Stepping Motors AR AZ SERIES

Tên thiết bị: Stepping Motor

Tình trạng: Còn hàng

Giá liên hệ
Ngoài ra có thể liên hệ thông qua Hotline: 028. 3636 8733 Hoặc gửi mail trực tiếp về: info@dpcvietnam.com

Stepper motors are used to achieve precise positioning via digital control. The motor operates by accurately synchronizing with the pulse signal output from the controller to the driver. Stepper motors, with their ability to produce high torque at low speed while minimizing vibration, are ideal for applications requiring quick positioning over a short distance.

⌊Stepping Motor and Driver Packages αSTEP⌋
-> AC Power Supply Input:

AZ Series
AC Input
FLEX Built-in Controller Type
Equipped with a ABZO sensor of the new development to the motor, and shortening of homing time to realize the motion control that does not use an external sensor. With built-in function of the pulse oscillator and lead to a variety of higher-level system that correspond to the FLEX that was equipped with the interface.
AZ Series
AC Input
Pulse Input Type
Equipped with ABZO a newly developed (Absorbing) sensor to the motor, to achieve the motion control that does not use an external sensor and shortening of homing time. The pulse input type enables the motor to be controlled from a pulse generator provided by the customer.
AR Series
AC Input
FLEX Built-in Controller Type
The AR Series substantially reduces heat generation from the motor through use of high-efficiency technology. This type is a built-in controller type.
AR Series
AC Input
Pulse Input Type
The AR Series substantially reduces heat generation from the motor through use of high-efficiency technology. This type is a pulse input type.

-> DC Power Supply Input:

AZ Series
DC Input
FLEX Built-in Controller Type
Equipped with a ABZO sensor of the new development to the motor, and shortening of homing time to realize the motion control that does not use an external sensor. With built-in function of the pulse oscillator and lead to a variety of higher-level system that correspond to the FLEX that was equipped with the interface.
AZ Series
DC Input
Pulse Input Type
Equipped with ABZO a newly developed (Absorbing) sensor to the motor, to achieve the motion control that does not use an external sensor and shortening of homing time. The pulse input type enables the motor to be controlled from a pulse generator provided by the customer.
AZ Series Multi Axis Drivers
【 New release!】
The multi axis drivers can be connected to DC power supply motors of our AZ Series and to the motorized actuators equipped with motors. We provide the multi axis drivers that can support MECHATROLINK-III, or EtherCAT Drive Profile. No. of axes: 2, 3, or 4.
AR Series
AD Input
FLEX Built-in Controller Type
The extensive AR Series DC Power-Supply Input lineup that utilizes high-efficiency technology. The built-in controller type equipped with interfaces that connect to a wide variety of host systems.
AR Series
AC Input
Pulse Input Type
The extensive AR Series DC Power-Supply Input lineup that utilizes high-efficiency technology. The pulse input type that enables the motor to be controlled from a pulse generator provided by the customer.

 

 

 

 

TypeFrame SizeResolution Setting: 1000 P/RMaximum Holding TorqueElectromagnetic brake
[mm][˚/Pulse][N・m]
TS Geared Type420.012~0.10.65~2.3No | Yes
601.8~6No | Yes
906~25No | Yes
PS Geared Type420.0072~0.0721~3No | Yes
603.5~8No | Yes
9010~37No | Yes
HPG Geared Type400.04~0.0721.5~2.5No | Yes
605.9~9No | Yes
9010~24No | Yes
Harmonic Geared Type420.0036~0.00723.5~5No | Yes
607~10No | Yes
9033~52No | Yes
FC Geared Type420.012~0.050.7~3No | Yes
602.5~10.5No | Yes
Standard Type420.360.3No | Yes
601.2~2No | Yes
852~4No | Yes