AR Series AC Input Pulse Input Type

Tên thiết bị: AR Series AC Input Pulse

Xuất xứ: Japan

Tình trạng: Còn hàng

Phân loại: Old Products
Giá liên hệ
Ngoài ra có thể liên hệ thông qua Hotline: 028. 3636 8733 Hoặc gửi mail trực tiếp về:
Stepping Motor and Driver Packages αSTEP - High-Efficiency

AR Series - AC Input Pulse Input Type

The AR Series substantially reduces heat generation from the motor through use of high-effi ciency technology. A pulse input type and a newly released built-in controller type are available.

Adopting Oriental Motor’s Original Closed Loop Control:

The AR Series uses our closed loop control to maintain positioning operation even during abrupt load fluctuations and accelerations. The rotor position detection sensor monitors the rotation. When an overload condition is detected, the AR Series will instantaneously regain control using the closed loop mode.
For details, refer to "Overview of Stepping Motor and Driver Packages αSTEP"

Continuous Operation is Achieved Due to the Reduction of Motor Heat Generation by Utilizing High-Effi ciency Technology:

- Lower Heat Generation

The AR Series utilizes high-efficiency technology to achieve a significant reduction in the amount of heat generated from the motor.

●Temperature Distribution by Thermography

●Motor Case Temperature under Same Operating Conditions

- Energy-Saving

Power consumption: up to 66% less✽ than a conventional model

●Power Consumption

Flex Types of Operation Systems:

Stepping motor and driver packages combine a stepping motor selected from various types with a dedicated driver. In addition to the pulse input type, drivers with a built-in controller type is also available.
Combination products

Built-In Controller Package:

The burden on the programmable PLC is reduced because the information necessary for motor operations is built into the driver. This simplifies the system configuration for multi-axis control. Set with control module (sold separately), data setting software, or RS-485 communication.

TypesFrame Size
Resolution Setting:
1000 P/R [˚/Pulse]
Maximum Holding Torque
Standard Type420.360.3
601.2 to 2
852 to 4
TH Geared Type420.012 to 0.10.35 to 1.5
601.25 to 4
904.5 to 12
FC Geared Type420.012 to 0.050.7 to 3
602.5 to 10.5
PS Geared Type420.0072 to 0.0721 to 3
603.5 to 8
9010 to 37
PN Geared Type420.036 to 0.0721.35 to 1.5
600.0072 to 0.0723.5 to 8
9010 to 37
Harmonic Geared Type420.0036 to 0.00723.5 to 5
605.5 to 8
9025 to 37