Takex Fiber type / HMD (medium/high temperature) FD600A Series

Mã sản phẩm: FD600A Series

Tên thiết bị: sensors

Xuất xứ: Japan

Tình trạng: Còn hàng

Phân loại: Takex
Giá liên hệ
Ngoài ra có thể liên hệ thông qua Hotline: 028. 3636 8733 Hoặc gửi mail trực tiếp về: info@dpcvietnam.com
  • 5-point level indicator facilitating optical axis alignment
  • Cooling unnecessary up to 200 °C

FD600A Series Lineup

ModelTypeDetection methodPower supplyControl outputDetectjing object temperatureOperating temperature range (C)Detecting distance (mm)Detectjing object (dia.)
FD600AHMD Fiber typeInfrared energy radiated100 - 220VACRelay580‐25~+200500.040
FD600AHHMD Fiber typeInfrared energy radiated100 - 220VACSignal relay580‐25~+200500.040
FD600ACHMD Fiber typeInfrared energy radiated100 - 220VACSolid state580‐25~+200500.040

Feature

The optical head and amplifier are connected with a fiber optic cable and the infrared ray captured with the optical head is transmitted through highly transmissive glass fiber into an amplifier installed at a distant location. The infrared ray transmitted into the amplifier is optically converted in the light sensitive element and amplified for control signal output (mini power relay, signal relay orsolid state output). Sensors for low temperature (FD300A Series) and medium/high temperature (FD600A Series) are available.

  • No cooling required The optical head integrating hood and optical lens and fiber optic cable have no electronic component, which allows use in ambient temperature of up to 200 C without cooling.
  • Excellent durability Reliable design with the hood and optical head made of metal, fiber optic cable covered with flexible stainless steel braid and metal cased amplifier provides robustness and resistance to heat and corrosion.
  • 5 point level indicator Received light intensity is indicated at 5 levels, offering easy viewing of stability.
  • Self check feature integrated (SAFETY feature) Operation can be checked with external signal. Stability check feature is provided, which outputs alarm signal (SAFETY ALARM) when there is not much margin in the received light intensity level at detection due to soiling of lens, light axis misalignment, etc. or external disturbing light or residual heat.
  • Two types of detection field of view Standard vew (dia.5mm/m) and Wide view (200x40mm/m, 400x30mm/m) are available.

SAFETY ALARM OUTPUT (ALL MODELS)

  When connecting an inductive load such as relay, be sure to use diode, surge absorber, etc. to protect output transistors from counter electromotive force.

CONNECTION

 

    When connecting an inductive load such as relay as the load, be sure to use diode, surge absorber, etc. for protection of output transistor from back electromotive force.

  • When the leads are extended (100-300 m), stray capacitance between leads may cause rush current. If this poses any problem, provide a resistor (10-50 Ω) in series with the contact.
  • Ground from frame Connect to the ground screw (M4) near the connector. You do not have to connect when already connected to the ground Pin.1 with a cable.

Option

OPTICAL HEAD

 

Optical headOHA

DescriptionOptical head (Standard view)
 

Optical headOHW1

DescriptionOptical head (Wide view)
 

Optical headOHW2

DescriptionOptical head (Wide view)

HOOD

 

HoodF38A

DescriptionAirless hood (Standard view)
Length120mm
Applicable optical headOHA OHAN OHAN10
 

HoodF38A-02

DescriptionAirless hood (Standard view)
Length200mm
Applicable optical headOHA OHAN OHAN10
 

HoodF38A-03

DescriptionAirless hood (Standard view)
Length300mm
Applicable optical headOHA OHAN OHAN10
 

HoodF38A-04

DescriptionAirless hood (Standard view)
Length400mm
Applicable optical headOHA OHAN OHAN10
 

HoodF38A-05

DescriptionAirless hood (Standard view)
Length500mm
Applicable optical headOHA OHAN OHAN10
 

HoodF38W

DescriptionAirless hood (Wide view)
Length200mm
Applicable optical headOHW1 OHW2
 

HoodF38PC-02

DescriptionAir purge hood (Standard view)
Length200mm
Applicable optical headOHA OHAN OHAN10
 

HoodF38PC-03

DescriptionAir purge hood (Standard view)
Length300mm
Applicable optical headOHA OHAN OHAN10
 

HoodF38PC-04

DescriptionAir purge hood (Standard view)
Length400mm
Applicable optical headOHA OHAN OHAN10
 

HoodF38PC-05

DescriptionAir purge hood (Standard view)
Length500mm
Applicable optical headOHA OHAN OHAN10
 

Hood302W

DescriptionAir purge hood (Wide view )
Applicable optical headOHW1 OHW2

FIBER OPTIC CABLE

 

Fiber optic cableFG2

DescriptionFiber optic cable
Length2m
 

Fiber optic cableFG3

DescriptionFiber optic cable
Length3m
 

Fiber optic cableFG4

DescriptionFiber optic cable
Length4m
 

Fiber optic cableFG5

DescriptionFiber optic cable
Length5m
 

Fiber optic cableFG7

DescriptionFiber optic cable
Length7m
 

Fiber optic cableFG10

DescriptionFiber optic cable
Length10m
 

Fiber optic cableFG15

DescriptionFiber optic cable
Length15m
 

Fiber optic cableFG20

DescriptionFiber optic cable
Length20m
 

Fiber optic cableFG30

DescriptionFiber optic cable
Length30m