Showa Denki Large sized series (Denchoku) K1D4

Mã sản phẩm: K1D4

Tên thiết bị: Máy thổi khí

Xuất xứ: Japan

Tình trạng: Còn hàng

Phân loại: Showadenki
Giá liên hệ
Ngoài ra có thể liên hệ thông qua Hotline: 028. 3636 8733 Hoặc gửi mail trực tiếp về: info@dpcvietnam.com

 
Air foil fanSirocco fan
ModelDischarge flange diameter (mm)Charge flange out diameter (mm)Output (kW)
K1D4360×460φ4750.75、1.5、5.5
K1D5420×540φ5401.5～3.7
K1D6480×610φ6253.7～7.5
K1D7540×690φ7005.5～11
K1D8600×770φ81011～18.5
K1D9660×850φ89015、18.5
ModelDischarge flange diameter (mm)Charge flange out diameter (mm)Output (kW)
Ｍ2Ｄ1180×230φ2400.75、1.5
Ｍ2Ｄ2240×300φ3250.75～5.5
Ｍ2Ｄ3300×380φ4001.5～15
Ｍ2Ｄ4360×460φ4753.7～11
Ｍ2Ｄ5420×540φ5407.5～18.5
  
Turbo fanTurbo blower
ModelDischarge flange diameter (mm)Charge flange out diameter (mm)Output (kW)
T1D22７0×190φ2651.5、2.2
T1D3340×205φ3353.7～7.5
T1D4400×245φ4007.5～18.5
T1D5470×285φ47515～30
T2D2270×190φ2650.75、1.5
T2D3340×205φ3351.5～3.7
T2D4400×245φ4003.7～11
T2D5470×285φ4757.5～15、22
T2D6540×325φ54015～22
ModelDischarge flange diameter (mm)Charge flange out diameter (mm)Output (kW)
B1D188×70JIS 5K 150A _166.62.2、3.7
B1D2110×80JIS 5K 200A _2183.7、5.5
B1D3131×100JIS 5K 200A _2185.5、7.5
B1D4156×125JIS 5K 200A _2187.5、11
B1D5200×160JIS 5K 250A _269.511、18.5
B1D6250×200JIS 5K 300A _32118.5、30
B1D7300×250JIS 5K 300A _32130、45
The number in ( ) indicates overrated max. airflow.

 
Maintenance simplification
Maintenance-free. No adjustment required, with only a few consumable goods and accessories. 
1.Since the impeller and electric motor axle are directly coupled, there is no need to adjust belt tension or exchange belts.
2.The electric motors in this series use a sealed bearing so there is no need to re-grease.
3.The bearing is longer lasting compared to belt driven machines.
4.Drive unit can be pulled out from the back with the impeller on, so the rotor can be taken down and repaired easily without taking off the intake and discharge pipes.
NOTICE If there is a foundation bolt implanted into the ground, you cannot pull out the drive unit by sliding it towards the back. (If you would like to have the drive unit to be pulled out by sliding towards the back, we can make special orders.) You may have to take off the electric wirings of the electric motor due to the electric wirings’ position.