Xuất xứ: Japan

Tình trạng: Còn hàng

Giá liên hệ
Ngoài ra có thể liên hệ thông qua Hotline: 028. 3636 8733 Hoặc gửi mail trực tiếp về:

Servo Motors, Drivers and Controllers

Servo Motors

Oriental Motor offers two types of servo motor solutions. Tuning Free Servo Motor products or Hybrid Servo Motor / Stepper Motor products. Both types of solutions provide closed loop control along with many other advantages.

Our Tuning Free Servo Motors are traditional servo solutions where the encoder provides feedback to the driver and all motion is controlled through a Position Counter. Use of the limited duty region is available for short periods of time where more torque is required.

Our Hybrid Servo Motor / Stepper Motors are closed loop as well and utilize a different motor technology where as they provide maximum torque throughout their entire speed torque range without the concern of operating in the limited duty region. See the speed torque comparison below for a clear comparison. Also, our Hybrid Servo Motor / Stepper Motor driver are Network compatible.

  • 50 W up to 750 W Tuning Free Servo Motors
  • Tuning Free or Hybrid Servo Motors available
  • Gear and Electromagnetic Brake options


  • Servo Motors (Motor Only)
  • Servo Motor Drivers
  • Controllers / Network Gateways


TypeOutput Power
Motor Frame Size
Gear RatioRated Torque
Permissible Torque
Standard Type5042-0.159--
PS Geared Type50601:5
-0.716 to 3.2215
1001.43 to 6.44
200902.87 to 12.9
4005.72 to 25.7
PJ Geared Type100801.27 to 6.363
2002.54 to 12.7
4001045.08 to 25.4
7509.56 to 47.8


Easy Operation:

As with a stepping motor, stable operation can be achieved in high inertia drive and belt mechanism drive applications without gain adjustment.
Also, adjusting the gain manually enables operation under even more stringent load conditions.

Achieves High Inertia Drive

With automatic tuning, operation up to 50 times the rotor inertia is possible.
With manual tuning, operation up to 100 times the rotor inertia is possible.

Achieves Smooth Operation with Belt Mechanisms

Belt mechanisms can be operated with the same feel as a stepping motor.
Operation without the occurrence of phenomena such as vibration before stopping is possible.

Easy Handling

Basic settings and adjustments are made with switches and potentiometers on the front panel.
This design allows for easy control without a computer and even saves the hassle of complicated UP and DOWN key operations.

Easy Setting and Easy Monitoring

By using the separately sold control module (OPX-2A) or data setting software (MEXE02), it is possible to perform changing of parameters, function setting, and monitoring that is better suited to your system.

● Operating Status Waveform Monitoring*

* Monitoring the operating status waveform requires the data setting software (MEXE02), which is sold separately.

4 Control Modes

This servo unit can operate in 4 control modes.
Also, with the separately sold control module (OPX-2A) or data setting software (MEXE02), the functions of each control mode can be extended.

Degree of Protection IP65

These motors conform to IP65 and they are ideal for use in environments requiring dust resistance and water resistance to protect against cutting dust suspended in air, splashed water droplets, etc.
(Standard type, electromagnetic brake type, PS geared type: excluding installation surface and connector locations, PJ geared type: excluding connector locations)

Simple Connections with Included Cables

The NX Series comes with cables to connect the motor and driver. You can select from 1 m, 2 m, or 3 m cables. If you need cables longer than 3 m or cables offering superior flexibility, appropriate cables are available as accessories (sold separately).

Separate Main Power Supply and Control Power Supply

A control power supply terminal that is separate from the main power supply is provided.
Even when the main power supply is cut off in the case of, for example, an emergency stop, operations such as position detection and alarm contents checking can be performed if 24 VDC power is supplied to the control power supply terminal.
(Operation with only the main power supply is also possible.)

Conforms to Semiconductor Equipment and Materials International Standards "SEMI F47"

● Conforms to SEMI Standards regarding power supply voltage drop.
● Effective for use in semiconductor equipment. (Always evaluate the product with it mounted on actual equipment.)

Characteristics Comparison for Geared Motor

The motor and driver package comes in 4 geared motor frame sizes ranging from 60 to 104 mm.

TypeOutput PowerMotor Frame SizeGear RatioRated TorquePermissible TorqueBacklash
Standard Type5042-0.159--
PS Geared Type50601:05-0.716 to 3.2215
1001:101.43 to 6.44
200901:252.87 to 12.9
4005.72 to 25.7
PJ Geared Type100801.27 to 6.363
2002.54 to 12.7
4001045.08 to 25.4
7509.56 to 47.8