PJ Geared Servo motor NX1040AS-J10-2

Tên thiết bị: PJ Geared Type Servo motor

Xuất xứ: Japan

Tình trạng: Còn hàng

Phân loại: Oriental Motor, Servo motor
Giá liên hệ
Ngoài ra có thể liên hệ thông qua Hotline: 028. 3636 8733 Hoặc gửi mail trực tiếp về: info@dpcvietnam.com

PJ Geared Servo motor NX1040AS-J10-2

 

Specifications

Frame Size104mm
Shaft/Gear TypePJ Geared Type
Electromagnetic BrakeWithout
Included Cable2m
Rated Output Power400W
Motor Permissible Speed3000r/min
Permissible Torque10.2N･m
Maximum Torque30.5N･m
Permissible Speed Range0～300r/min
Rotor Inertia J0.535×10^-4J:kg・m^2
Gearhead Internal Inertia J0.888×10^-4J:kg・m^2
Permissible Load Inertia J2680×10^-4J:kg・m^2
Resolution (Motor Shaft)100 to 100000P/R
DetectorAbsolute Encoder 1 rotation 20 bits, multiple rotations 16 bits
Backlash3min
Angular Transmission Error4min
Gear Ratio10
Power Supply Input Voltage, Frequency, AC Main Power SupplyThree-Phase 200-230 VAC −15 to +10% 50/60 Hz
Power Supply Input Voltage, DC Control Power Supply24 VDC -10~+10% 0.8 A
Power Supply Input Rated Input Current2.9A
StandardEN
CE Markingaffixed
Command MethodPulse, Analog Speed Command Voltage, Analog Torque Command Voltage
Maximum Input Pulse Frequency500 kHz (When the pulse duty is 50%) *1
Protective FunctionWhen the following protective functions are activated, an alarm output signal is output and the motor is stopped.
Overflow, Overcurrent Protection, Overheat Protection, Overvoltage Protection, Main Power Supply Error, Undervoltage, Motor Overheat Protection, Sensor Error during Operation, Encoder Communication Error, Overload, Overspeed, Position Range Error, Absolute Position Loss, Command Pulse Error, EEPROM Error, Sensor Error during Initialization, Rotor Rotation during Initialization, Encoder EEPROM Error,Motor Combination Error, ABS Not Supported, No Battery, Regeneration Unit Overheat, Electronic Gear Setting Error
Mass: Motor7.7kg
Mass: Control Circuit1.6kg
  • ●The gearhead internal inertia is the motor shaft converted value.
    ●The value for 50 times the rotor inertia.
    ●The resolution for the motor output shaft.
    ●These values are for operation in the continuous duty region. For operation in the limited duty region, the maximum current is approximately 3 times the value shown.
  • *1 Line driver output by programmable controller
    Open collector output by programmable controller: 250 kHz (When the pulse duty is 50%) The values when the separately-sold general-purpose cable (CC36D1-1) is used.
Product NamePower Supply VoltageFrame SizeShaft/Gear TypeRated Output PowerRated SpeedRated TorqueResolution
(Motor Shaft)
NX1040AS-J10-1Three-Phase 200-230 VAC104mmPJ Geared Type400W10.2N･m100 to 100000P/R10
NX1040AS-J10-2Three-Phase 200-230 VAC104mmPJ Geared Type400W10.2N･m100 to 100000P/R10
NX1040AS-J10-3Three-Phase 200-230 VAC104mmPJ Geared Type400W10.2N･m100 to 100000P/R10
NX1040AS-J25-1Three-Phase 200-230 VAC104mmPJ Geared Type400W25.4N･m100 to 100000P/R25
NX1040AS-J25-2Three-Phase 200-230 VAC104mmPJ Geared Type400W25.4N･m100 to 100000P/R25
NX1040AS-J25-3Three-Phase 200-230 VAC104mmPJ Geared Type400W25.4N･m100 to 100000P/R25
NX1040AS-J5-1Three-Phase 200-230 VAC104mmPJ Geared Type400W5.08N･m100 to 100000P/R5
NX1040AS-J5-2Three-Phase 200-230 VAC104mmPJ Geared Type400W5.08N･m100 to 100000P/R5
NX1040AS-J5-3Three-Phase 200-230 VAC104mmPJ Geared Type400W5.08N･m100 to 100000P/R5
NX1040MS-J10-1Three-Phase 200-230 VAC104mmPJ Geared Type400W10.2N･m100 to 100000P/R10
NX1040MS-J10-2Three-Phase 200-230 VAC104mmPJ Geared Type400W10.2N･m100 to 100000P/R10
NX1040MS-J10-3Three-Phase 200-230 VAC104mmPJ Geared Type400W10.2N･m100 to 100000P/R10
NX1040MS-J25-1Three-Phase 200-230 VAC104mmPJ Geared Type400W25.4N･m100 to 100000P/R25
NX1040MS-J25-2Three-Phase 200-230 VAC104mmPJ Geared Type400W25.4N･m100 to 100000P/R25
NX1040MS-J25-3Three-Phase 200-230 VAC104mmPJ Geared Type400W25.4N･m100 to 100000P/R25
NX1040MS-J5-1Three-Phase 200-230 VAC104mmPJ Geared Type400W5.08N･m100 to 100000P/R5
NX1040MS-J5-2Three-Phase 200-230 VAC104mmPJ Geared Type400W5.08N･m100 to 100000P/R5
NX1040MS-J5-3Three-Phase 200-230 VAC104mmPJ Geared Type400W5.08N･m100 to 100000P/R5
NX1075AS-J10-1Three-Phase 200-230 VAC104mmPJ Geared Type750W19.1N･m100 to 100000P/R10
NX1075AS-J10-2Three-Phase 200-230 VAC104mmPJ Geared Type750W19.1N･m100 to 100000P/R10
NX1075AS-J10-3Three-Phase 200-230 VAC104mmPJ Geared Type750W19.1N･m100 to 100000P/R10
NX1075AS-J25-1Three-Phase 200-230 VAC104mmPJ Geared Type750W47.8N･m100 to 100000P/R25
NX1075AS-J25-2Three-Phase 200-230 VAC104mmPJ Geared Type750W47.8N･m100 to 100000P/R25
NX1075AS-J25-3Three-Phase 200-230 VAC104mmPJ Geared Type750W47.8N･m100 to 100000P/R25
NX1075AS-J5-1Three-Phase 200-230 VAC104mmPJ Geared Type750W9.56N･m100 to 100000P/R5
NX1075AS-J5-2Three-Phase 200-230 VAC104mmPJ Geared Type750W9.56N･m100 to 100000P/R5
NX1075AS-J5-3Three-Phase 200-230 VAC104mmPJ Geared Type750W9.56N･m100 to 100000P/R5
NX1075MS-J10-1Three-Phase 200-230 VAC104mmPJ Geared Type750W19.1N･m100 to 100000P/R10
NX1075MS-J10-2Three-Phase 200-230 VAC104mmPJ Geared Type750W19.1N･m100 to 100000P/R10
NX1075MS-J10-3Three-Phase 200-230 VAC104mmPJ Geared Type750W19.1N･m100 to 100000P/R10
NX1075MS-J25-1Three-Phase 200-230 VAC104mmPJ Geared Type750W47.8N･m100 to 100000P/R25
NX1075MS-J25-2Three-Phase 200-230 VAC104mmPJ Geared Type750W47.8N･m100 to 100000P/R25
NX1075MS-J25-3Three-Phase 200-230 VAC104mmPJ Geared Type750W47.8N･m100 to 100000P/R25
NX1075MS-J5-1Three-Phase 200-230 VAC104mmPJ Geared Type750W9.56N･m100 to 100000P/R5
NX1075MS-J5-2Three-Phase 200-230 VAC104mmPJ Geared Type750W9.56N･m100 to 100000P/R5
NX1075MS-J5-3Three-Phase 200-230 VAC104mmPJ Geared Type750W9.56N･m100 to 100000P/R5
NX810AA-J10-1Single-Phase 100-115 VAC80mmPJ Geared Type100W2.54N･m100 to 100000P/R10
NX810AA-J10-2Single-Phase 100-115 VAC80mmPJ Geared Type100W2.54N･m100 to 100000P/R10
NX810AA-J10-3Single-Phase 100-115 VAC80mmPJ Geared Type100W2.54N･m100 to 100000P/R10
NX810AA-J25-1Single-Phase 100-115 VAC80mmPJ Geared Type100W6.36N･m100 to 100000P/R25
NX810AA-J25-2Single-Phase 100-115 VAC80mmPJ Geared Type100W6.36N･m100 to 100000P/R25
NX810AA-J25-3Single-Phase 100-115 VAC80mmPJ Geared Type100W6.36N･m100 to 100000P/R25
NX810AA-J5-1Single-Phase 100-115 VAC80mmPJ Geared Type100W1.27N･m100 to 100000P/R5
NX810AA-J5-2Single-Phase 100-115 VAC80mmPJ Geared Type100W1.27N･m100 to 100000P/R5
NX810AA-J5-3Single-Phase 100-115 VAC80mmPJ Geared Type100W1.27N･m100 to 100000P/R5
NX810AC-J10-1Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type100W2.54N･m100 to 100000P/R10
NX810AC-J10-2Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type100W2.54N･m100 to 100000P/R10
NX810AC-J10-3Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type100W2.54N･m100 to 100000P/R10
NX810AC-J25-1Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type100W6.36N･m100 to 100000P/R25
NX810AC-J25-2Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type100W6.36N･m100 to 100000P/R25
NX810AC-J25-3Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type100W6.36N･m100 to 100000P/R25
NX810AC-J5-1Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type100W1.27N･m100 to 100000P/R5
NX810AC-J5-2Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type100W1.27N･m100 to 100000P/R5
NX810AC-J5-3Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type100W1.27N･m100 to 100000P/R5
NX810MA-J10-1Single-Phase 100-115 VAC80mmPJ Geared Type100W2.54N･m100 to 100000P/R10
NX810MA-J10-2Single-Phase 100-115 VAC80mmPJ Geared Type100W2.54N･m100 to 100000P/R10
NX810MA-J10-3Single-Phase 100-115 VAC80mmPJ Geared Type100W2.54N･m100 to 100000P/R10
NX810MA-J25-1Single-Phase 100-115 VAC80mmPJ Geared Type100W6.36N･m100 to 100000P/R25
NX810MA-J25-2Single-Phase 100-115 VAC80mmPJ Geared Type100W6.36N･m100 to 100000P/R25
NX810MA-J25-3Single-Phase 100-115 VAC80mmPJ Geared Type100W6.36N･m100 to 100000P/R25
NX810MA-J5-1Single-Phase 100-115 VAC80mmPJ Geared Type100W1.27N･m100 to 100000P/R5
NX810MA-J5-2Single-Phase 100-115 VAC80mmPJ Geared Type100W1.27N･m100 to 100000P/R5
NX810MA-J5-3Single-Phase 100-115 VAC80mmPJ Geared Type100W1.27N･m100 to 100000P/R5
NX810MC-J10-1Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type100W2.54N･m100 to 100000P/R10
NX810MC-J10-2Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type100W2.54N･m100 to 100000P/R10
NX810MC-J10-3Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type100W2.54N･m100 to 100000P/R10
NX810MC-J25-1Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type100W6.36N･m100 to 100000P/R25
NX810MC-J25-2Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type100W6.36N･m100 to 100000P/R25
NX810MC-J25-3Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type100W6.36N･m100 to 100000P/R25
NX810MC-J5-1Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type100W1.27N･m100 to 100000P/R5
NX810MC-J5-2Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type100W1.27N･m100 to 100000P/R5
NX810MC-J5-3Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type100W1.27N･m100 to 100000P/R5
NX820AA-J10-1Single-Phase 100-115 VAC80mmPJ Geared Type200W5.1N･m100 to 100000P/R10
NX820AA-J10-2Single-Phase 100-115 VAC80mmPJ Geared Type200W5.1N･m100 to 100000P/R10
NX820AA-J10-3Single-Phase 100-115 VAC80mmPJ Geared Type200W5.1N･m100 to 100000P/R10
NX820AA-J25-1Single-Phase 100-115 VAC80mmPJ Geared Type200W12.7N･m100 to 100000P/R25
NX820AA-J25-2Single-Phase 100-115 VAC80mmPJ Geared Type200W12.7N･m100 to 100000P/R25
NX820AA-J25-3Single-Phase 100-115 VAC80mmPJ Geared Type200W12.7N･m100 to 100000P/R25
NX820AA-J5-1Single-Phase 100-115 VAC80mmPJ Geared Type200W2.54N･m100 to 100000P/R5
NX820AA-J5-2Single-Phase 100-115 VAC80mmPJ Geared Type200W2.54N･m100 to 100000P/R5
NX820AA-J5-3Single-Phase 100-115 VAC80mmPJ Geared Type200W2.54N･m100 to 100000P/R5
NX820AC-J10-1Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type200W5.1N･m100 to 100000P/R10
NX820AC-J10-2Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type200W5.1N･m100 to 100000P/R10
NX820AC-J10-3Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type200W5.1N･m100 to 100000P/R10
NX820AC-J25-1Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type200W12.7N･m100 to 100000P/R25
NX820AC-J25-2Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type200W12.7N･m100 to 100000P/R25
NX820AC-J25-3Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type200W12.7N･m100 to 100000P/R25
NX820AC-J5-1Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type200W2.54N･m100 to 100000P/R5
NX820AC-J5-2Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type200W2.54N･m100 to 100000P/R5
NX820AC-J5-3Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type200W2.54N･m100 to 100000P/R5
NX820MA-J10-1Single-Phase 100-115 VAC80mmPJ Geared Type200W5.1N･m100 to 100000P/R10
NX820MA-J10-2Single-Phase 100-115 VAC80mmPJ Geared Type200W5.1N･m100 to 100000P/R10
NX820MA-J10-3Single-Phase 100-115 VAC80mmPJ Geared Type200W5.1N･m100 to 100000P/R10
NX820MA-J25-1Single-Phase 100-115 VAC80mmPJ Geared Type200W12.7N･m100 to 100000P/R25
NX820MA-J25-2Single-Phase 100-115 VAC80mmPJ Geared Type200W12.7N･m100 to 100000P/R25
NX820MA-J25-3Single-Phase 100-115 VAC80mmPJ Geared Type200W12.7N･m100 to 100000P/R25
NX820MA-J5-1Single-Phase 100-115 VAC80mmPJ Geared Type200W2.54N･m100 to 100000P/R5
NX820MA-J5-2Single-Phase 100-115 VAC80mmPJ Geared Type200W2.54N･m100 to 100000P/R5
NX820MA-J5-3Single-Phase 100-115 VAC80mmPJ Geared Type200W2.54N･m100 to 100000P/R5
NX820MC-J10-1Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type200W5.1N･m100 to 100000P/R10
NX820MC-J10-2Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type200W5.1N･m100 to 100000P/R10
NX820MC-J10-3Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type200W5.1N･m100 to 100000P/R10
NX820MC-J25-1Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type200W12.7N･m100 to 100000P/R25
NX820MC-J25-2Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type200W12.7N･m100 to 100000P/R25
NX820MC-J25-3Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type200W12.7N･m100 to 100000P/R25
NX820MC-J5-1Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type200W2.54N･m100 to 100000P/R5
NX820MC-J5-2Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type200W2.54N･m100 to 100000P/R5
NX820MC-J5-3Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type200W2.54N･m100 to 100000P/R5

 

Product NamePower Supply VoltageFrame SizeShaft/Gear TypeRated Output PowerRated SpeedRated TorqueResolution
(Motor Shaft)
NX1040AS-J10-1Three-Phase 200-230 VAC104mmPJ Geared Type400W10.2N･m100 to 100000P/R10
NX1040AS-J10-2Three-Phase 200-230 VAC104mmPJ Geared Type400W10.2N･m100 to 100000P/R10
NX1040AS-J10-3Three-Phase 200-230 VAC104mmPJ Geared Type400W10.2N･m100 to 100000P/R10
NX1040AS-J25-1Three-Phase 200-230 VAC104mmPJ Geared Type400W25.4N･m100 to 100000P/R25
NX1040AS-J25-2Three-Phase 200-230 VAC104mmPJ Geared Type400W25.4N･m100 to 100000P/R25
NX1040AS-J25-3Three-Phase 200-230 VAC104mmPJ Geared Type400W25.4N･m100 to 100000P/R25
NX1040AS-J5-1Three-Phase 200-230 VAC104mmPJ Geared Type400W5.08N･m100 to 100000P/R5
NX1040AS-J5-2Three-Phase 200-230 VAC104mmPJ Geared Type400W5.08N･m100 to 100000P/R5
NX1040AS-J5-3Three-Phase 200-230 VAC104mmPJ Geared Type400W5.08N･m100 to 100000P/R5
NX1040MS-J10-1Three-Phase 200-230 VAC104mmPJ Geared Type400W10.2N･m100 to 100000P/R10
NX1040MS-J10-2Three-Phase 200-230 VAC104mmPJ Geared Type400W10.2N･m100 to 100000P/R10
NX1040MS-J10-3Three-Phase 200-230 VAC104mmPJ Geared Type400W10.2N･m100 to 100000P/R10
NX1040MS-J25-1Three-Phase 200-230 VAC104mmPJ Geared Type400W25.4N･m100 to 100000P/R25
NX1040MS-J25-2Three-Phase 200-230 VAC104mmPJ Geared Type400W25.4N･m100 to 100000P/R25
NX1040MS-J25-3Three-Phase 200-230 VAC104mmPJ Geared Type400W25.4N･m100 to 100000P/R25
NX1040MS-J5-1Three-Phase 200-230 VAC104mmPJ Geared Type400W5.08N･m100 to 100000P/R5
NX1040MS-J5-2Three-Phase 200-230 VAC104mmPJ Geared Type400W5.08N･m100 to 100000P/R5
NX1040MS-J5-3Three-Phase 200-230 VAC104mmPJ Geared Type400W5.08N･m100 to 100000P/R5
NX1075AS-J10-1Three-Phase 200-230 VAC104mmPJ Geared Type750W19.1N･m100 to 100000P/R10
NX1075AS-J10-2Three-Phase 200-230 VAC104mmPJ Geared Type750W19.1N･m100 to 100000P/R10
NX1075AS-J10-3Three-Phase 200-230 VAC104mmPJ Geared Type750W19.1N･m100 to 100000P/R10
NX1075AS-J25-1Three-Phase 200-230 VAC104mmPJ Geared Type750W47.8N･m100 to 100000P/R25
NX1075AS-J25-2Three-Phase 200-230 VAC104mmPJ Geared Type750W47.8N･m100 to 100000P/R25
NX1075AS-J25-3Three-Phase 200-230 VAC104mmPJ Geared Type750W47.8N･m100 to 100000P/R25
NX1075AS-J5-1Three-Phase 200-230 VAC104mmPJ Geared Type750W9.56N･m100 to 100000P/R5
NX1075AS-J5-2Three-Phase 200-230 VAC104mmPJ Geared Type750W9.56N･m100 to 100000P/R5
NX1075AS-J5-3Three-Phase 200-230 VAC104mmPJ Geared Type750W9.56N･m100 to 100000P/R5
NX1075MS-J10-1Three-Phase 200-230 VAC104mmPJ Geared Type750W19.1N･m100 to 100000P/R10
NX1075MS-J10-2Three-Phase 200-230 VAC104mmPJ Geared Type750W19.1N･m100 to 100000P/R10
NX1075MS-J10-3Three-Phase 200-230 VAC104mmPJ Geared Type750W19.1N･m100 to 100000P/R10
NX1075MS-J25-1Three-Phase 200-230 VAC104mmPJ Geared Type750W47.8N･m100 to 100000P/R25
NX1075MS-J25-2Three-Phase 200-230 VAC104mmPJ Geared Type750W47.8N･m100 to 100000P/R25
NX1075MS-J25-3Three-Phase 200-230 VAC104mmPJ Geared Type750W47.8N･m100 to 100000P/R25
NX1075MS-J5-1Three-Phase 200-230 VAC104mmPJ Geared Type750W9.56N･m100 to 100000P/R5
NX1075MS-J5-2Three-Phase 200-230 VAC104mmPJ Geared Type750W9.56N･m100 to 100000P/R5
NX1075MS-J5-3Three-Phase 200-230 VAC104mmPJ Geared Type750W9.56N･m100 to 100000P/R5
NX810AA-J10-1Single-Phase 100-115 VAC80mmPJ Geared Type100W2.54N･m100 to 100000P/R10
NX810AA-J10-2Single-Phase 100-115 VAC80mmPJ Geared Type100W2.54N･m100 to 100000P/R10
NX810AA-J10-3Single-Phase 100-115 VAC80mmPJ Geared Type100W2.54N･m100 to 100000P/R10
NX810AA-J25-1Single-Phase 100-115 VAC80mmPJ Geared Type100W6.36N･m100 to 100000P/R25
NX810AA-J25-2Single-Phase 100-115 VAC80mmPJ Geared Type100W6.36N･m100 to 100000P/R25
NX810AA-J25-3Single-Phase 100-115 VAC80mmPJ Geared Type100W6.36N･m100 to 100000P/R25
NX810AA-J5-1Single-Phase 100-115 VAC80mmPJ Geared Type100W1.27N･m100 to 100000P/R5
NX810AA-J5-2Single-Phase 100-115 VAC80mmPJ Geared Type100W1.27N･m100 to 100000P/R5
NX810AA-J5-3Single-Phase 100-115 VAC80mmPJ Geared Type100W1.27N･m100 to 100000P/R5
NX810AC-J10-1Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type100W2.54N･m100 to 100000P/R10
NX810AC-J10-2Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type100W2.54N･m100 to 100000P/R10
NX810AC-J10-3Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type100W2.54N･m100 to 100000P/R10
NX810AC-J25-1Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type100W6.36N･m100 to 100000P/R25
NX810AC-J25-2Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type100W6.36N･m100 to 100000P/R25
NX810AC-J25-3Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type100W6.36N･m100 to 100000P/R25
NX810AC-J5-1Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type100W1.27N･m100 to 100000P/R5
NX810AC-J5-2Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type100W1.27N･m100 to 100000P/R5
NX810AC-J5-3Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type100W1.27N･m100 to 100000P/R5
NX810MA-J10-1Single-Phase 100-115 VAC80mmPJ Geared Type100W2.54N･m100 to 100000P/R10
NX810MA-J10-2Single-Phase 100-115 VAC80mmPJ Geared Type100W2.54N･m100 to 100000P/R10
NX810MA-J10-3Single-Phase 100-115 VAC80mmPJ Geared Type100W2.54N･m100 to 100000P/R10
NX810MA-J25-1Single-Phase 100-115 VAC80mmPJ Geared Type100W6.36N･m100 to 100000P/R25
NX810MA-J25-2Single-Phase 100-115 VAC80mmPJ Geared Type100W6.36N･m100 to 100000P/R25
NX810MA-J25-3Single-Phase 100-115 VAC80mmPJ Geared Type100W6.36N･m100 to 100000P/R25
NX810MA-J5-1Single-Phase 100-115 VAC80mmPJ Geared Type100W1.27N･m100 to 100000P/R5
NX810MA-J5-2Single-Phase 100-115 VAC80mmPJ Geared Type100W1.27N･m100 to 100000P/R5
NX810MA-J5-3Single-Phase 100-115 VAC80mmPJ Geared Type100W1.27N･m100 to 100000P/R5
NX810MC-J10-1Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type100W2.54N･m100 to 100000P/R10
NX810MC-J10-2Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type100W2.54N･m100 to 100000P/R10
NX810MC-J10-3Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type100W2.54N･m100 to 100000P/R10
NX810MC-J25-1Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type100W6.36N･m100 to 100000P/R25
NX810MC-J25-2Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type100W6.36N･m100 to 100000P/R25
NX810MC-J25-3Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type100W6.36N･m100 to 100000P/R25
NX810MC-J5-1Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type100W1.27N･m100 to 100000P/R5
NX810MC-J5-2Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type100W1.27N･m100 to 100000P/R5
NX810MC-J5-3Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type100W1.27N･m100 to 100000P/R5
NX820AA-J10-1Single-Phase 100-115 VAC80mmPJ Geared Type200W5.1N･m100 to 100000P/R10
NX820AA-J10-2Single-Phase 100-115 VAC80mmPJ Geared Type200W5.1N･m100 to 100000P/R10
NX820AA-J10-3Single-Phase 100-115 VAC80mmPJ Geared Type200W5.1N･m100 to 100000P/R10
NX820AA-J25-1Single-Phase 100-115 VAC80mmPJ Geared Type200W12.7N･m100 to 100000P/R25
NX820AA-J25-2Single-Phase 100-115 VAC80mmPJ Geared Type200W12.7N･m100 to 100000P/R25
NX820AA-J25-3Single-Phase 100-115 VAC80mmPJ Geared Type200W12.7N･m100 to 100000P/R25
NX820AA-J5-1Single-Phase 100-115 VAC80mmPJ Geared Type200W2.54N･m100 to 100000P/R5
NX820AA-J5-2Single-Phase 100-115 VAC80mmPJ Geared Type200W2.54N･m100 to 100000P/R5
NX820AA-J5-3Single-Phase 100-115 VAC80mmPJ Geared Type200W2.54N･m100 to 100000P/R5
NX820AC-J10-1Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type200W5.1N･m100 to 100000P/R10
NX820AC-J10-2Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type200W5.1N･m100 to 100000P/R10
NX820AC-J10-3Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type200W5.1N･m100 to 100000P/R10
NX820AC-J25-1Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type200W12.7N･m100 to 100000P/R25
NX820AC-J25-2Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type200W12.7N･m100 to 100000P/R25
NX820AC-J25-3Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type200W12.7N･m100 to 100000P/R25
NX820AC-J5-1Single-Phase/Three-Phase 200-230 VAC80mmPJ Geared Type200W2.54N･m100 to 100000P/R5
NX820AC-J5-2