PID CONTROLLERS – PERFORMANCE SERIES TIPL VIETNAM

Mô tả ngắn: Performance Series PID Temperature Controller adopts special microcomputer based circuit that employs switching power and Surface Mount Technology (SMT), thereforethe controller is very reliable. It has special functions like auto fault diagnosing, auto tuning and intelligent control. It can be used widely in the display and control of various parameters like temperature etc.

Mã sản phẩm: TC7G, TC7A

Tên thiết bị: PID Temperature Controller

Xuất xứ: India

Tình trạng: Còn hàng

Phân loại: Tipl
Giá liên hệ
Ngoài ra có thể liên hệ thông qua Hotline: 028. 3636 8733 Hoặc gửi mail trực tiếp về: info@dpcvietnam.com

Công ty TNHH TM DV Đại Phú Cát (DPCVIETNAM)-Đại lý chính thức  hãng TIPL (India) tại Việt Nam – Chuyên cung cấp các loại Thermocouple, Recorders, Pressure Transmitters….

Và đây là 1 số dòng sản phẩm DPC Vietnam cung cấp:

Model (Size)

DIN 48 x 48mm (WxH) - TC7G

DIN 96 x 96mm (WxH) - TC7A

Input & Range

Thermocouple (TC) Resistance Temperature Detector (RTD)/ mA/ VDC

(Selectable as per Input range table)

Display

Dual 4 digit, 7-segment LED display: Process Value (PV) Red, Set Value (Green)

LED: Control output (OUT1) Green; Alarm (ALM1/2) Red; Auto tune (AT) Yellow

Control Type

PID Control (including ON/OFF and continuous PID);

Auto Tuning Control selectable

Accuracy

Measurement Accuracy: ±0.5%FS

Compensation error of cold Junction: 2°C (within 0~50°C)

Resolution: 14bit. Sampling period: 0.5sec

Setting Range

Setting Value (SV): same range as PV

Proportional Band (P): 0~100% (ON/OFF Control when set to 0)

Integration Time (I): 0~3600sec (no integral action when set to 0)

Derivative Time (D): 0~3600sec (no derivative action when set to 0)

Cycle time: 1~100sec

ON/OFF control output / Alarm hysteresis: 1~100°C

Sensor Correction:  - 200~200

Software filter: 0~100s

Control Output

Relay: 250V AC, 3A (resistive load) SPDT (TC7A) / SPST (in TCTG_2)

Voltage pulse: 0~12V DC (applicable for solid state relay SSR)

Current: DC 4~20mA (RL<500­Ω)

AlarmsRelay output: Upto 2 Alarm output (resistive load) relay with 12 selectable modes, Output Contact SPST Capacity: 250V AC, 3A
Other Parameters

Insulation resistance: >50M­Ω (500V DC)

Insulation strength: 1500V AC/min

Power consumption: <10W

Service environment: 0~50°C, 30~85RH, non corrosive

Weight:  TC7G: 150g; TC7A: 320g (approx.)