| Frame Size | 80mm |
|---|---|
| Shaft/Gear Type | Pinion Shaft Type |
| Gear Ratio | - |
| Time Rating | Continuous |
| Maximum Output | 25W |
| Voltage / Frequency / Current / Power Consumption | Single-Phase 220VAC / 50Hz / 0.36A / 68W Single-Phase 220VAC / 60Hz / 0.37A / 68W Single-Phase 230VAC / 50Hz / 0.35A / 68W Single-Phase 230VAC / 60Hz / 0.36A / 68W |
| Starting Torque (Motor Shaft) | Single-Phase 220VAC / 50Hz: 100mN･m Single-Phase 220VAC / 60Hz: 100mN･m Single-Phase 230VAC / 50Hz: 110mN･m Single-Phase 230VAC / 60Hz: 110mN･m |
| Speed Control Range | Depends on the combination gear head. |
| Permissible Torque (Motor Shaft) | Single-Phase 220VAC / 50Hz, Setting speed 90r/min: 40mN･m Single-Phase 220VAC / 60Hz, Setting speed 90r/min: 40mN･m Single-Phase 230VAC / 50Hz, Setting speed 90r/min: 40mN･m Single-Phase 230VAC / 60Hz, Setting speed 90r/min: 35mN･m Single-Phase 220VAC / 50Hz, Setting speed 1200r/min: 205mN･m Single-Phase 220VAC / 60Hz, Setting speed 1200r/min: 160mN･m Single-Phase 230VAC / 50Hz, Setting speed 1200r/min: 205mN･m Single-Phase 230VAC / 60Hz, Setting speed 1200r/min: 140mN･m |
| Permissible Torque When Gearhead is Attached | Depends on the combination gear head. |
| Standard | UL、CSA、GB |
| CE Marking | affixed |
| RoHS Directive | conforms |
| Overheat Protection Device Type | Thermal protector |
| Speed Setting Method | potentiometer on front panel |
| Max. Extension Distance | 4.75 m between motor and control circuit |
| Mass: Motor | 1.6kg |
| Mass: Control Circuit | 0.45kg |
- ●There is a built-in thermal protector (automatic return type). If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting
