DPC VIỆT NAM CHUYÊN CUNG CẤP DAT400S CỦA HÃNG PAVONE SISTEMI
DAT 400 S
Weighing atex and stainless steel
- Configuration and calibration from the front panel, or via the serial port with the program Inovation ™ (MS Windows) - Function of upload and download programming with TESTER 1006 - Linearization on 10 points - RS232 serial output oRS422 / RS485 MODBUS RTU or ASCII protocols selectable - ATEX, IP66 / 67, area 2.22 - Connected directly to the fieldbus PROFIBUS and DeviceNet option card - Optional analogue output (0 to 20mA, 4 to 20mA, 0 to 5V, 0 to 10V) adjustable on the whole measuring range 
TECHNICAL DAT 400 S
| Sensor supply: | 5 V (max 6 cells of 350 Ohm) |
| Measuring range: | -0.5 to +3.5 mV / V (optional from -3.9 to +3.9 mV / V) |
| Input sensitivity: | 0:02 microV / division |
| Linearity: | <0.01% of full scale |
| Temperature drift: | <0.001% FS / ° C |
| Status LEDs: | 4 red |
| A / D converter: | 24 bit |
| Displayable resolution: | 60,000 displayable divisions on net weight |
| Decimals set: | 0.0; 0:00; 0.000 |
| Filter: | selectable from 0.1 to 25 Hz |
| Power tool: | 24 VDC ± 15% - power consumption 5 W |
| Operating temperature: | -10 / + 40 ° C (humidity max 85% non-condensing) |
| Storage temperature: | -20 / + 50 ° C |
| Logic outputs: | 2 relay (contact) MAX 24 VDC / 100 mA each. |
| Logic inputs: | 2 opto-isolated 24 VDC PNP (external power supply) |
| Serial port: | USB, RS232C or RS422 / RS485 with Modbus RTU or ASCII protocols |
| Transmission distance: | 15m (RS232C), 1000m (RS422 and RS485) |
| Communication with other fieldbus: | CANopen, Modbus-Plus and other |
| Peak Hold function: | for dynamic measurements |
| Baud rate: | 2400, 9600, 19200, 38400, 115200 selectable |
| Regulatory Compliance: | EN61326-1, EN55011 and EN55014 for EMC; EN61010-1 for Electrical Safety |
| ATEX II 3 GD EEx nR IIC T6 IP65: | EN 13463-1: 2003; EN 60529: 1991 + A1: 2000 IEC 60079-0: 2004; IEC 60079-15: 2005 |
| Optional analogue output: | Optically isolated 16-Bit, Voltage: 0 to 5 or 0 to 10V (R> 10 K Ohm); Current: 0 to 20 or 4 to 20 mA (R <300 Ohm); Linearity 0.03% of full scale |
| BCD output option: | Via external modules |
| Protocol to fieldbus option: | PROFIBUS, DEVICENET |
| AC power supply Optional: | 115/230 VDC 50/60 Hz |
