DPC VIỆT NAM CHUYÊN CUNG CẤP DAT200 PROFIBUS WEIGHING TRANSMITTERS CỦA HÃNG PAVONE SISTEMI
DAT 200/PROFIBUS
Weighing inst. Weight transmitters
- High performance and long-term reliability - Snap-on" assembly on DIN rail (EN50022) - Fieldbus: PROFIBUS DP - Configuration and calibration by the front panel - Calibration executable with the certificates of transducers, or with dead weights - Serial RS232 output, ASCII protocols - The dimensions of width contained allow to place a large number of transmitters within the electrical panels automation - Interfacing with intrinsically safe barriers for use in hazardous areas
TECHNICAL CHARACTERISTICS DAT 200/PROFIBUS
| Trasducer input voltage: | 4 V (max 4 cells 350 Ohm) |
| Measuring range: | –4 ÷ +4 mV/V |
| Displayed sensitivity: | 0.02 V/division |
| Linearity: | < 0.01% FS |
| Gain drift: | < 0.001% FS/°C |
| Display: | 5 digit, red LED (7 segments), h 7 mm |
| LED status: | 2 red |
| D/A convertitor: | 24 bit |
| Internal resolution: | 16.000.000 counts |
| Visible resolution: | 60.000 division visible on net weight |
| Divisions value: | 0.001÷50 adjustable |
| Filter: | 0.02÷25 Hz adjustable |
| Keyboard: | 3 mechanic buttons (under the red window) |
| Tool voltage: | 24 Vcc ±10% – power 2 W |
| Temperature range: | -10 / +50°C |
| Storage Temperature: | -20 / +60°C |
| Serial door: | RS232C half duplex with ASCII protocol |
| Baud rate: | 2400÷115200 adjustable |
| Fieldbus protocol: | Profibus DP-V1 |
| Baud rate: | 9.6 K/sec ÷ 12 Mbit/sec |
| Regulatory compliance: | EN61000-6-2, EN61000-6-3 for EMC; EN61010-1 for electrical security |
| Electrical connection: | Terminal screw pass 5.08 mm |
