DPC VIỆT NAM CHUYÊN CUNG CẤP DAT100 ANALOG WEIGHING TRANSMITTERS CỦA HÃNG PAVONE SISTEMI
DAT 100 / ANALOG
Weighing transmitters
- High performance and long term reliability - Mounting "snap-on" DIN rail (EN50022) - ANALOG output (4-20 mA, 0-20 mA, 0-5 Vdc, 0-10 Vdc) - Configuration and calibration from the front panel executable with certificates of transducers, or with known weights - 2 logic inputs and 2 relay outputs - Outputs RS232, Modbus RTU and ASCII protocols - The size of a width contained allow to place a large number of transmitters within the electrical panels of automation - Interfacing with barriers Intrinsically Safe for use in hazardous areas
TECHNICAL DAT 100 / ANALOG
| Sensor supply: | 4 Vdc (max 4 cells of 350 Ohm) |
| Measuring range: | -4 To +4 mV / V |
| Input sensitivity: | 00:02 V / division |
| Linearity: | <0.01% FS |
| Temperature drift: | <0.001% FS / ° C |
| Display: | 5-digit, 7-segment red LED, height 7 mm |
| Status LEDs: | 2 red |
| A / D converter: | 24 bit |
| Internal resolution: | 16,000,000 points |
| Displayable resolution: | 60,000 displayable divisions on net weight |
| Value divisions (selectable): | 0001 ÷ 50 |
| Filter: | selectable 0.2 to 25 Hz |
| Keyboard: | 3 mechanical buttons (behind the red door) |
| Power tool: | 24 VDC ± 10% - Power consumption 2 W |
| Operating temperature: | -10 To + 50 ° C (humidity max 85% non-condensing) |
| Storage temperature: | -20 To + 60 ° C |
| Logic outputs: | 2 optisolate; MAX 24 VDC / 100 mA each |
| Logic inputs: | 2 opto-isolated 24 VDC PNP (external power supply) |
| Serial Ports: | RS232 half duplex protocol ASCII or Modbus RTU |
| Baud rate: | 2400 ÷ 115200 selectable |
| Analog output: | optically isolated 16-Bit |
| Voltage: | 0 ÷ 5 / 10V (R min10 K Ohm) |
| Current: | 0/4 to 20mA (max R 300 Ohm) |
| Linearity: | <0,03% FS |
| Temperature drift: | <0.002% FS |
| Regulatory Compliance: | EN61000-6-2, EN61000-6-3 for EMC; EN61010-1 for Electrical Safety |
| Electrical connections: | Screw terminal blocks 5.08 mm pitch |
