Công ty TNHH TM DV Đại Phú Cát (DPCVIETNAM)-Đại lý chính thức hãng MOTOR WANSHSIN tại Việt Nam – Chuyên cung cấp các loại Motor AC, DC, Motor điều khiển tốc độ….
Và đây là 1 số dòng sản phẩm DPC Vietnam cung cấp:
Different types of motor performance
◆Although the speed adjustable range of speed motor is:50Hz…90~1300r/min;60Hz…90~600r/min.Motor torque goes down a lot and easy to be loaded, and cooling performance of motor connected fan is bad and easy to get hot.It has to keep enough power margin,and don't opearte in low velocity areas frequently.The motor best speed adjustable range is:50Hz—400~1300r/min；60Hz—400~1600r/min.
◆Motor will stop immediately and keep loading when power off.
◆Motor start and braking characteristics are proportional to motor load mass inertia.
■Reduction gearbox ratio performance comparison table
◆The revolving speed in the table is the base as motor average revolving speed(50 Hz：1300r/min、60 Hz：1600 r/min) and then divide reduction ratio to calculate the value.
◆The actual revolving speed changes as different loading size,and the rang is around 8%.
| Types | Max.outputpower w | VoltageV | FrequencyHZ | CurrentA | Speedranger/min | Starting torqueN·mm | Rated torque | Operatingcapacitance | |||||
| 1200r/min | 90r/min | ||||||||||||
| Gear shaft | 60YS06GV11 | 6 | single-phase 110 | 50HZ | 0.23 | 90-1300 | 38 | 47 | 30 | 2.5μf/250V | |||
| 60YR06GV11 | |||||||||||||
| 60YT06GV11 | |||||||||||||
| 60YB06GV11 | |||||||||||||
| Round shaft | 60YS06DV11 | 60HZ | 0.21 | 90-1600 | 40 | 50 | 30 | ||||||
| 60YR06DV11 | |||||||||||||
| 60YT06DV11 | |||||||||||||
| 60YB06DV11 | |||||||||||||
| Gear shaft | 60YS06GV22 | 6 | single-phase 220 | 50HZ | 0.11 | 90-1300 | 38 | 47 | 32 | 0.8μf/450V | |||
| 60YR06GV22 | |||||||||||||
| 60YT06GV22 | |||||||||||||
| 60YB06GV22 | |||||||||||||
| Round shaft | 60YS06DV22 | 60HZ | 0.10 | 90-1600 | 40 | 50 | 32 | ||||||
| 60YR06DV22 | |||||||||||||
| 60YT06DV22 | |||||||||||||
| 60YB06DV22 | |||||||||||||
| Reduction ratio | 3 | 3.6 | 5 | 6 | 7.5 | 10 | 12.5 | 15 | 18 | 20 | 25 | 30 | |
| 50 Hz | Max. revolving speed r/min | 433 | 361 | 260 | 217 | 173 | 130 | 104 | 87 | 72 | 65 | 52 | 43 |
| Rated torque N·m | 0.13 | 0.15 | 0.22 | 0.26 | 0.33 | 0.44 | 0.55 | 0.66 | 0.79 | 0.88 | 1.10 | 1.32 | |
| 60 Hz | Max. revolving speed r/min | 533 | 444 | 320 | 267 | 213 | 160 | 128 | 107 | 89 | 80 | 64 | 53 |
| Rated torque N·m | 0.11 | 0.13 | 0.18 | 0.22 | 0.28 | 0.37 | 0.46 | 0.55 | 0.66 | 0.73 | 0.92 | 1.10 | |
| Reduction ratio | 36 | 40 | 50 | 60 | 75 | 0 | 100 | 120 | 15 | 180 | 200 | ||
| 50 Hz | Max. revolving speed r/min | 36 | 33 | 26 | 22 | 17 | 14 | 13 | 11 | 9 | 7 | 7 | |
| Rated torque N·m | 1.59 | 1.76 | 2.06 | 2.18 | 2.42 | 3 | 3 | 3 | 3 | 3 | 3 | ||
| 60 Hz | Max. revolving speed r/min | 44 | 40 | 32 | 27 | 21 | 18 | 16 | 13 | 11 | 9 | 8 | |
| Rated torque N·m | 1.33 | 1.47 | 1.71 | 1.82 | 2.02 | 2.42 | 2.65 | 3 | 3 | 3 | 3 |
